Call Swap; Speaker Mode; Three-Party Conference - Nortel 3100 User Manual

3. Select Hold & Call.
The call is placed on hold. Hold & Call Initiated appears in the dialpad
display.
4. Do one of the following:
— To complete a blind transfer, select Transfer and hang up.
— To complete a supervised transfer, wait for an answer, consult,
select Transfer and hang up.
5. To resume the call, select Cancel.

Call Swap

Switch between two different while you are engaged in a call.
Swapping between two parties
1. While a call is connected, select Feature.
2. Dial the number.
3. Select Hold & Call.
The call is placed on hold.
4. When the party answers, press Swap to alternate between the two
parties.

Speaker Mode

Switch between the system speaker and the earpiece speaker.
While a call is connected, select Spkr On.
To switch a call from the system speaker to the earpiece speaker, select
Spkr Off.

Three-Party Conference

Hold three-party conferences using the MCC 3100.
Holding a conference call
1. While a call is connected, press Feature.
2. Dial the number that you want to add to the conference call.
Nortel Mobile Communication Client 3100 for Windows Mobile User Guide
Advanced functions
69