Web OS 10.0 Application Guide
Test Configurations and General Topology
The switches should be able to health check each other, and all switches should see four real
servers up. (Rules on the VPN devices permit this—see
Figure 14-3 Checkpoint Rules for Both VPN Devices as Seen in the Policy Editor
1.
Disconnect the cables (cause failures) to change the available servers that are up.
>> # /info/slb/dump
This should change the VRRP preferences. You can view VRRP preferences using the CLI
command /info/vrrp.
2.
Use the Checkpoint Log Viewer to watch for accepted and dropped traffic. In the tool bar
above, click on Window, then Log Viewer.
N
OTE
n
368
Chapter 14: Virtual Private Network Load Balancing
–
To help simplify the logs, the health checks are not logged.
Figure 14-3 on page
368.)
(Verify which servers are up)
212777-A, February 2002