Advertisement
The NETGEAR® 5/8-Port Gigabit Ethernet Switch Model GS605 / GS608 provides you with a high-speed, reliable, easy-to-use switch to connect up to five or eight different Ethernet enabled devices (such as computers, file servers, print servers, printers, routers and hubs).
Gigabit Ethernet Switch GS605 / GS608
You use the GS605 / GS608 switch to build a small network that enables you to have 10 Mbps, 100 Mbps and 1000 Mbps connections to other devices on the network. Using Gigabit Ethernet (1000 Mbps), you will be sending files across your network at speeds up to 2,000 Mbps due to the full-duplex nature of Gigabit Ethernet. This enables you to move large amounts of data up to 10 times faster than a Fast Ethernet switch. Also, with this switch, you can add extra computers to your cable or DSL router.
Ethernet cables come as either straight-through or crossover cables—depending on whether you're connecting to a device (computer, server, or printer) or networking equipment (hub, switch, or router). With the Auto Uplink™ feature, you don't have to worry about which one you use. Each port on the GS605/GS608 switch automatically configures itself correctly when you plug in a device's cable.
Estimated Time: 5–10 minutes
When you open the box, verify that you received everything. The package includes:
Decide where you want to place the switch. Find a flat horizontal surface — such as a table, desk or shelf.
Make sure the selected location is:
Note: Neither the GS605 nor GS608 are designed to be stacked on top of other GS605 or GS608 switches. If you need several units in one location, use the vertical stand to position several units near each other.
Also, you'll need one Enhanced Category 5 (Cat 5e) Ethernet cable with RJ-45 connectors for each device you want to connect to the switch. Each Ethernet cable must be less than 328 feet (100 meters).
The Power light is not lit
The switch has no power.
The Port number light is not lit for a connected device or stays on continuously
There's a hardware connection problem.
Standards Compatibility: | Specifications IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u, 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1p Priority Tags; compatible with Windows®, Mac® OS, NetWare®, Linux® |
Network Interface: | RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Ethernet interface |
DC Power: | 12W max and 12 V @ 1A DC input |
Physical Dimensions (h x w x d): | 1.2 x 7 x 4.6 in (31 x 177 x 117 mm) |
Weight: | GS605: 0.63 lbs (0.28 kg) / GS608: 0.69 lbs (0.31 kg) |
Operating Temperature: | 0 to 40°C (32 to 104°F) |
Electromagnetic Compliance: | CE mark, Commercial; FCC Part 15, Class A; EN 55 022 (CISPR 22) Class A, VCCI Class A, C-Tick |
Safety Agency Approvals for the Power Adapter: | CE mark, Commercial UL listed (UL 1950), C-Tick |
Frame Filter Rate: | 14,800 frames/sec max for 10M port/148,800 frames/sec max for 100M port/1,488,000 frames/sec max for 1000M port |
Frame Forward Rate: | 14,800 frames/sec max for 10M port / 148,800 frames/sec max for 100M port/1,488,000 frames/sec max for 1000M port |
Network Latency: (using 64-byte packets) | 1000 Mbps to 1000 Mbps: 20 µs max |
Address Database Size: | 4000 MAC addresses |
Addressing: | 48-bit MAC address |
Packet Buffer Memory: | 1 Mb |
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
It is hereby certified that the NETGEAR Model GS605/608 Gigabit Ethernet Switch has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the series for compliance with the regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This is to certify that the NETGEAR Model GS605/608 Gigabit Ethernet Switch is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a.
Conformity is declared by the application of EN 55 022 Class A (CISPR 22).
This digital apparatus (NETGEAR Model GS605/608 Gigabit Ethernet Switch) does not exceed the Class A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications
PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT.
By registering your product at www.NETGEAR.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades.
©2004 NETGEAR, Inc. NETGEAR, the Netgear logo, Auto Uplink, ProSafe and Everybody's connecting are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved.
May 2004
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download NETGEAR GS605 / GS608 - Gigabit Ethernet Switch Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the GS605 that isn't answered in the manual? Leave your question here.