Discover A Switch In A Network Without A Dhcp Server - NETGEAR GS418TPP User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
6. Make a note of the displayed IP address assigned by the DHCP server.
You can use this address later to access the switch directly from a web browser (that is,
without using the Smart Control Center).
7. Select your switch by clicking the line that displays the switch.
8. Click the Web Browser Access button.
The Smart Control Center launches a browser that displays the login page of the selected
device.
Use your web browser to manage your switch. The default password is password. For
more information about the page layout and options, see Navigation tabs, configuration
menus, and page menu on page 22.

Discover a switch in a network without a DHCP server

This section describes how to use the Smart Control Center to set up your switch in a
network without a DHCP server. If your network does not include a DHCP service, you must
assign a static IP address to your switch.
If you prefer, you can assign the switch a static IP address even if your network does include
a DHCP server.
Get Started 15 User Manual