Traffic Control; Configure Mac Filter Settings - NETGEAR M4100 Series User Manual

The following table describes the nonconfigurable information displayed on the screen.
Table 84. Client summary
Field
Port
User Name
Supplicant Mac Address
Session Time
Filter ID
Vlan ID
Vlan Assigned
Session Timeout
Termination Action

Traffic Control

You can configure MAC filters, storm control, port security, and protected port settings. To
display the screen, select Security

Configure MAC Filter Settings

You can create MAC filters that limit the traffic allowed into and out of specified ports on the
system.

To configure MAC filter settings:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
M4100 Series Managed Switch
Description
The port to be displayed.
This field displays the user name representing the identity of the
supplicant device.
This field displays supplicant's device MAC address.
This field displays the time since the supplicant as logged, in seconds.
This field displays policy filter ID assigned by the authenticator to the
supplicant device.
This field displays VLAN ID assigned by the authenticator to the
supplicant device.
This field displays reason for the VLAN ID assigned by the
authenticator to the supplicant device.
This field displays session timeout set by the RADIUS server to the
supplicant device.
This field displays termination action set by the RADIUS server to the
supplicant device.

Traffic Control.
Manage Device Security
310