Yamaha YZF1000RJ Service Manual page 75

NOTE: - - - - - - - - - - - -
When verifying the valve clearance adjust-
ment use the new pad number only as an
approximation. It will be necessary to mea-
sure the valve clearance again and if neces-
sary, repeat the above steps.
• Install the new pads G) and the valve lift-
ers®.
NOTE: - - - - - - - - - - - -
• Apply molybdenum disulfide grease to
'the pads.
• Lubricate the valve lifters with molybde-
num disulfide oil.
• The valve lifters must turn smoothly when
rotated by hand.
• Be careful to reinstall the valve lifters and
the old pads in their original position.
3 - 16
• Install the camshafts (exhaust and intake),
the timing chain and the camshaft caps.
Bolt (camshaft cat,):
10 Nm (1,0 m • kg, 7,2 ft• lb)
•
•
•
I
•l
l
•
•
•