Yamaha YZF1000RJ Service Manual page 104

•
•
•
•
•
•
•
I
IANDSJP
1 • ~ I
cqoLANT REPLACEMENT
~
---------------------------
3- 45
11-1
----------
• Hard water or salt water is harmful to
engine parts. If soft water is not available
use only distilled water.
• If you use tap water, make sure that it is
soft water.
• Do not use water containing impurities or
oil.
• If coolant comes into contact with
painted surfaces, immediately wash them
with water .
• Do not mix different types of ethylene
glycol antifreeze containing corrosion
inhibitors for aluminium engines.
10.lnstall:
• Radiator cap
11.Fill:
• Coolant reservoir
(to the upper level mark@)
12.lnstall:
• Coolant reservoir cap
13.Start the engine and let it warm up for
several minutes.
14.Turn off the engine and inspect the cool-
ant level.
Refer to "COOLANT LEVEL INSPECTION" .
NOTE: - - - - - - - - - - - -
Before checking the coolant level wait a few
minutes until the coolant settles.
15.lnstall:
• Front cowling assembly
·• Rear view mirrors (left and right)
• Side cowlings (left and right)
• Bottom cowling
• Bottom cowling (front)
• Side panel (right)
• Passenger seat
• Rider seat
Refer to "COWLINGS", "FUEL TANK" and
"SEATS".