Yamaha YZF1000RJ Service Manual page 247

2
6-6
cARBUREToRs
lcARBI t;
I
4.Remove:
• Connecting bolt (lower)
G)
•Collars®
• Joints (air vent hose-vacuum chamber)@
• Joints (coolant feed) @
(with the 0-rings)
• Joints (fuel feed)
@
(with the 0-rings)
•Joints®
• Joints (carburetor breather)
(J)
•Springs®
(from between carburetors #1 and #2 and
#3 and #4)
Since the removed parts are defective, do
not reuse them.
NOTE:
When separating the carburetors be careful
not to lose the return spring
®
located
under the synchronizing screw@).
5.Remove:
• Starter plunger
G)
NOTE:
Unhook the hooks from the carburetor
body and then pull out the starter plunger.
6.Remove:
• Vacuum chamber cover
G)
•Spring®
• Jet needle holder@
• Spring@
• Jet needle @
• Throttle valve®
•
•
•
•
•
•
•