Yamaha YZF1000RJ Service Manual page 315

7 - 60
a.Install:
• Throttle grip
• Throttle cable housing
NOTE: _ _ _ _ _ _ _ _ _ _ _ _
Align the projection
CD
on the handlebar
switch with the hole
®
in the handlebar .
9.lnstall:
• Grip ends (left and right)
Grip end:
21 Nm (2.1 m • kg, 15 ft • lb)
10.lnstall:
• Handlebar switches (left and right)
NOTE: - - - - - - - - - - - -
Align the projection
CD
on the handlebar
switch with the hole
®
in the handlebar.
11.lnstall:
• Clutch lever holder
• Brake lever holder
NOTE: - - - - - - - - - - - -
Align the slit in the lever holders
CD
with the
punch mark® on the handlebars.
lll!!lllllll!llllllllilllllft _ _ _ _ _
• Install the lever holders with the uupn
mark facing up.
•
•
•
•
•
• First, tighten the upper bolt and then •
tighten the lower bolt.
Bolt (lever holder):
13 Nm (1.~ m • kg, 9.4 ft• lb)
•