Yamaha YZF1000RJ Service Manual page 145

•
•
•
EX
IN
•
•
•
•
ENGINE DISASSEMBLY
I
ENG
l\al
4 - 11
Procedure 2 .
• Insert the pin ®, use it to positfon the
pick-up rotor G), then install the bolt@.
Part
No:@ 4U8-81673-10 or 33M-81673-10
(6)
91317-08030
@ 93604-08071
• Turn the crankshaft counterclockwise.
4.Align:
• "T" mark
(with the stationary pointer)
NOTE: - - - - - - - - - - - -
• Turn the crankshaft counterclockwise and
align the "T" mark @ with the with sta-
tionary pointer@ when the #1 piston is at
TDC on the compression stroke.
• The #1 piston is at TDC on the compres-
sion stroke when the cam lobes are oppo-
site one other, as shown in the
illustration .
5.Loosen:
• Cap bolt (tensioner) G)
6.Remove:
• Timing chain tensioner®
• Gasket
7.Remove:
• Timing chain guide (upper) G)
• Timing chain guide (exhaust side)®