Yamaha YZF1000RJ Service Manual page 200

ENGINE ASSEMBLY AND ADJUSTMENT
I
ENG
I ~I
A
WARNING
Always use new O-rings.
3.lnstall:
Bolt (oil delivery pipe #1):
10 Nm (1.0 m • kg, 7.2 ft• lb)
LOCTITE®
Bolt (oil delivery pipe #2):
10 Nm (1.0 m • kg, 7.2 ft• lb)
• Oil strainer housing G)
~
- Bolt (oil strainer):
~~
10 Nm (1.0 m • kg, 7.2 ft• lb)
NOTE: - - - - - - - - - - - -
The arrow mark @ on the strainer cover
4- 66
must point to the front of the engine.
4.lnstall:
•'Baffle plate (oil pan) G)
Bolt (baffle plate):
10 Nm (1.0 m • kg, 7.2 ft• lb)
5.lnstall:
• Dowel pins
• Gasket (oil pan)
• Oil pan G)
• Stays (bottom cowling)
®
• Oil level switch @
(with the O-ring)
• Drain bolt@
(with the copper washer)
®
Clamp (oil level switch lead)
A
WARNING
Always use new copper washers and gas-
kets.
NOTE: - - - - - - - - - - - -
• Tighten the oil pan bolts in a crisscross
pattern.
• Apply engine oil onto the oil level switch
O-ring.
•
•
•
•
•
•