Yamaha YZF1000RJ Service Manual page 255

6 - 14
cAReuREToRs
lcARel Iii
I
2.lnspect:
• Throttle position sensor
**********************************
Inspection steps:
•Disconnect the throttle position sensor
coupler.
• Remove the throttle position sensor from
the carburetors.
• Connect the pocket tester
(Q
x 1 k) to the
throttle position sensor coupler.
Tester(+)
lead ➔
Blue terminal G)
Tester (-) lead
➔
Black/Blue terminal
®
•Check the throttle position sensor resis-
tance.
□
H
TPS resistance:
~
4.0 .. &.o
kn at
2o·c (68°F)
(Blue - Black/blue)
Out of
specification ➔
Replace the throttle
position sensor.
• Connect the pocket tester
(Q
x 1 k) to the
throttle position sensor coupler.
Tester(+)
lead ➔
Yellow terminal@
Tester(-) lead ➔ Black/Blue terminal®
•While slowly turning the throttle, check
the throttle position sensor resistance.
Throttle position sensor resis-
tance:
0 - 5
±
1.0 kQ
at
20°C (68°F)
(Yellow - Black/blue)
Out of specification
➔
Replace the throttle
position sensor.
**********************************
•
•
•
•
•
•
•