Yamaha YZF1000RJ Service Manual page 261

_ _ _ _ _ _ _ _ _ _ _ _ FR_o_N_T_w_H_E_E_L
lcHAslAI
X
7-6
3.Find:
• Heavy spot
**********************************
Procedure:
a.Spin the wheel and wait for it to rest.
b.Put an "X1" mark on the wheel's bottom
spot.
c.Turn the wheel so that the "X1" mark is
facing
so·
up.
d.Release the wheel and wait for it to rest.
Put an "X2" mark on the wheel's bottom
spot.
e.Repeat steps b, c, and d several times
until all the marks come to rest at the
same spot.
f. This is the wheel's heavy spot "X".
**********************************
4.Adjust:
• Front wheel static balance
**********************************
Adjusting steps:
• Install a balancing weight G) onto the rim
exactly opposite to the heavy spot
0
X".
NOTE:
Start with the smallest weight.
•Turn the wheel so that the heavy spot is
so·
up.
• Check that the heavy spot is at rest there.
If not, try another weight until the wheel is
balanced.
**********************************
5.Check:
• Front wheel static balance
**********************************
Checking steps:
eTurn the wheel so that it comes to each
point, as shown in the illustration.
• Check that the wheel is at rest at each
point. If not, readjust the front wheel
static balance.
**********************************
•
•
•
•
•
•
•