Yamaha YZF1000RJ Service Manual page 147

•
•
•
•
•
•
•
ENGINE DISASSEMBL V
I
ENG
I \al
4 -
13
Procedure 2 .
1.Remove:
• Camshaft caps G)
• Dowel pins
NOTE:
• For reference during reinstallation, put
identification marks on each camshaft
cap.
• Remove the camshaft cap bolts in a criss-
cross pattern from the outer caps working
in .
To prevent damage to the cylinder head,
camshafts and camshaft caps, loosen the
camshaft cap bolts in a crisscross pattern,
from the outside working in.
2.Remove:
• Camshafts (intake G) and exhaust®)
NOTE:
To prevent the timing chain from falling
into the crankcase fasten a wire@ to it.
3.Remove: ·
• Nuts (cylinder head)
NOTE:
• Loosen the nuts in the proper sequence.
• Follow the numerical order shown in the
illustration. Loosen each nut 1/2 of a turn
at a time until all of the nuts are loosened.
4.Remove:
• Cylinder head
NOTE:
To prevent the valve lifters and adjusting
pads from falling into the crankcase,
remove as a unit the cylinder head .