Yamaha YZF1000RJ Service Manual page 314

•
•
•
•
•
•
•
STEERING HEAD AND HANDLEBARS
ICHAS1~1
7 - 59
3.Tighten:
• Ring nuts (lower and upper)
Refer to "STEERING HEAD INSPECTION"
in CHAPTER 3.
4.lnstall:
• Upper bracket
• Nut (steering stem)
NOTE: - - - - - - - - - - - - -
Temporarily tighten the steering stem nut.
5.lnstall:
• Front forks
• Handlebar bosses
Refer to "FRONT FORK".
NOTE: - - - - - - - - - - - -
Temporarily tighten the front fork pinch
bolt.
6.lnstall:
• Handlebars (left and right)
Handlebar:
28 Nm (2.8 m • kg, 20 ft• lb).
7.Tighten:
• Nut (steering stem)
• Front fork pinch bolts (upper)
• Pinch bolts (handlebar boss)
• Front fork pinch bolts (lower)
Nut (steering stem):
110 Nm (11.0 m • kg, 80ft • lb)
Bolt (handlebar boss and upper
bracket):
13 Nm (1.3 m • kg, 9.4 ft • lb)
Pinch bolt (upper):
26 Nm (2.6 m • kg, 19 ft • lb)
Pinch bolt (handlebar boss):
17 Nm (1.7 m • kg, 12 ft• lb)
Pinch bolt (lower):
23 Nm (2.3 m • kg, 17 ft• lb)