•
•
•
•
•
•
•
~
Fasten the clutch hose, starter cable, left
handlebar switch lead and main switch lead
with the metal guides; the items should be
installed in the order listed with the first
item on top.
(ID Place the couplers on top of the ignition coil
plate.
19
Install the wire harness, starter cable and
clutch cable in the order listed with the first
item on top .
-------··
~ - - ~
\ .
. I
L
5
4
7
6
A
cAeLe ROUTING
lsPEcl
~
I
[Q) Use a plastic clamp to fasten the wire harness at
the position marked with white tape.
III
Pass the seat lock cable under the wire harness.
!ID
Use a plastic band to fasten the meter lead,
headlight sub lead, fan motor lead, main switch
lead and left handlebar switch lead, then insert
the hook on the plastic band into the hole in the
ignition coil plate.
[8] Front
9
B
C
2- 33