Yamaha YZF1000RJ Service Manual page 283

FRONT AND REAR eRAKEs
lcHAsl~I
EB702060
MASTER CYLINDER ASSEMBL V
A
WARNING
• Before installation all internal brake com-
ponents should be cleaned and lubricated
with new brake fluid only.
~
Recommended brake fluid:
•v
DOT4
• Whenever a master cylinder is disassem-
bled replace the caliper piston seals.
7 -
28
Front brake
1.lnstall:
• Master cylinder kit
CD
• Brake switch
2.lnstall:
• Master cylinder
CD
NOTE: - - - - - - - - - - - -
• Install the master cylinder holder with·the
"UP" mark facing up.
• Align the end of the master cylinder
holder with the punch mark@ on the han-
dlebar.
• First, tighten the upper bolt, then tighten
the lower bolt.
Bolt (master cylinder holder):
13 Nm (1.3 m • kg, 9.4
ft•
lb)
•
•
•
•
•
•
•