Table of Contents
Advertisement
ELECTRIC STARTING SYSTEM
I
ELEC
I
D
I
EB803021
3.Starter motor
• Connect the battery positive terminal
CD
and starter motor cable
®
using a
jumper lead®*·
• Check the operation of the starter motor.
0
EB803023
~
MOVES
4.Starting circuit cut-off relay (relay unit)
• Remove the relay unit from the wire har-
ness.
• Connect the pocket tester
(Q
x 1) and
battery (12 V) to the relay unit terminals.
Battery
(+)
terminal
➔
Red/Black terminal
CD
Battery(-)
terminal ➔
Black/Yellow terminal
®
Tester(+)
lead ➔
Blue terminal@
Tester(-)
lead ➔
Blue/White terminal@
• Check the starting circuit cut-off relay for
continuity.
~
CONTINUITY
*
8 - 14
*
A
WARNING
• A wire that is used as a jumper lead must
have the equivalent capacity or more as
that of the battery lead, otherwise the
jumper lead may burn.
• This check is likely to produce sparks, so
be sure that no flammable gas or fluid is
in the vicinity.
DOES NOT MOVE
•
I
Repair or replace the starter motor.
NO CONTINUITY
•
Replace the starting circuit cut-off relay.
•
•
•
•
•
•
•
Advertisement
Table of Contents
Troubleshooting
