Yamaha YZF1000RJ Service Manual page 267

Hide thumbs Also See for YZF1000RJ:

Table of Contents

FRONT AND REAR eRAKEs

Disc brake components rarely require dis-

assembly. DO NOT:

• Disassemble components unless abso-

lutely necessary.

• Use solvents on internal brake compo-

• Use spent brake fluid for cleaning (use

only clean brake fluid).

• Allow brake fluid to come into contact

with the eyes, as this may cause eye

• Splash brake fluid onto painted surfaces

or plastic parts, as this may cause dam-

• Disconnect any hydraulic connection, as

this would require the entire brake sys-

disassembled,

cleaned, properly filled and bled after

BRAKE PAD REPLACEMENT

NOTE: - - - - - - - - - - - -

When replacing the brake pads it is not nec-

essary to disassemble the brake caliper and

• Nut (brake hose holder) G)

• Brake caliper®

• Retaining clips G)

• Retaining pin ®

• Brake pad spring@

Troubleshooting