Yamaha YZF1000RJ Service Manual page 373

!•
•
•
•
•
•
•
EB806023
3.lf the flasher light and/or turn indicator
light fails to blink:
1.Bulb and bulb socket
• Check the bulb and bulb socket for conti-
nuity.
~
CONTINUITY
2.Turn switch
• Disconnect the left handlebar switch
couplers from the wire harness.
• Check for continuity as follows:
Brown/White
CD -
Chocolate®
Brown/White
CD-
Dark green@
~
CONTINUITY
3.Voltage
• Connect the pocket tester (DC 20 V) to
the flasher relay coupler.
Tester(+) lead ➔ Brown terminal
CD
Tester (-) lead
➔
Frame ground
• Turn the main switch to "ON".
• Check the voltage (12 V) of the "Brown"
CD
lead at the flasher relay terminal.
n
MEETS
V
SPECIFICATION
*
8- 43
SIGNAL SYSTEM
I
ELEC
I
D
I
NO CONTINUITY
•
I
Replace the bulb and/or bulb socket.
NO CONTINUITY
•
I
Replace the left handlebar switch.
OUT OF SPECIFICATION
•
The wiring circuit from the main switch to
the flasher relay connector is faulty, repair
it.