Table of Contents
Advertisement
•
•
•
•
•
•
•
6 - 11
cAReuReToRs
l c ARBI
'i
I
NOTE: - - - - - - - - - - - -
• Place the carburetor assembly on a sur-
face plate with the intake manifold side
down and then tighten the connecting
bolts while pushing down the respective
carburetor with an even force .
• After tightening, check the throttle lever
and starter joint for smooth action.
6.lnstall:
• Starter cable G)
NOTE: _ _ _ _ _ _ _ _ _ _ _ _
Clamp the starter cable with the holder®·
EB600060
INSTALLATION
Reverse the "REMOVAL" procedure.
Note the following points .
1.Fill:
• Cooling system
Refer to "COOLANT REPLACEMENT" in
CHAPTER 3.
2.Adjust:
• Carburetor synchronization
Refer to "CARBURETOR
SYNCHRONIZA-
TION" in CHAPTER 3.
3.Adjust:
• Idling speed
~
Engine idling speed:
V t
1,050 .., 1,150 r/min
Refer to "IDLING SPEED ADJUSTMENT"
in CHAPTER 3.
4.Adjust:
• Throttle cable free play
Throttle cable free play:
3 ... 7 mm (0.12.., 0.28 in)
(at the throttle grip flange)
Refer to "THROTTLE CABLE ADJUST-
MENT" in CHAPTER 3.
Advertisement
Table of Contents
Troubleshooting
