Yamaha YZF1000RJ Service Manual page 272

•
•
•
•
•
•
•
FRONT AND REAR eRAKEs
lcHAslAI
7 - 17
**********************************
Removal steps:
• Use a piece of wood@ to secure the right
side caliper pistons.
eTo force out the left side caliper pistons
from the brake caliper body blow com-
pressed air into the hose joint opening@.,
•Remove the caliper piston seals and rein~·
stall the left side caliper pistons.
• Repeat the previous steps to force out the
right side caliper pistons from the brake
caliper body.
A
WARNING
• Never try to pry out the caliper pistons.
• Do not remove the plugs @ and the brake
caliper pipe
®·
**********************************
EB70W22
Rear brake
1.Loosen:
• Union bolt
2.Remove:
• Brake caliper
• Brake pad cover
• Retaining clips
• Retaining pins
• Brake pad spring
• Brake pads
(with the brake pad shims)
Refer to "BRAKE PAD REPLACEMENT".
3.Remove:
• Union bolt G)
• Copper washers ®
• Brake hose@
NOTE: - - - - - - - - - - - -
Put the open end of the hose into a con-
tainer and pump out the brake fluid care-
fully .
4.Remove:
• Brake caliper pistons G)
• Caliper piston seals®