\
HvoRAuuc cwTcH
I CHAslAI
3.lnstall:
• Copper washers
• Clutch hose Ci)
• Union bolt®
~
-
Union bolt:
~~
30 Nm (3.0 m • kg, 22
ft •
lb)
When installing the clutch hose onto the
clutch release cylinder, make sure that the
pipe touches the projection
®·
A
WARNING
• Proper clutch hose routing is essential to
insure safe motorcycle operation. Refer
to uCABLE ROUTING".
• Always use new copper washers.
4.Fill:
• Clutch reservoir
, ~ , R~~~mended fluid:
Clutch fluid may damage painted surfaces
or plastic parts. Always clean up spilled
clutch fluid immediately.
7 - 38
A
WARNING
• Use only the designated quality clutch
fluid: other clutch fluids may deteriorate
the rubber seals, causing leakage and
poor clutch performance.
• Refill with the same type of clutch fluid:
mixing clutch fluids may result in a harm-
ful chemical reaction and lead to poor
clutch performance.
• When refilling, be careful that water does
not enter the master cylinder. Water will
significantly lower the boiling point of the
fluid and may result in vapor lock.
•
•
•
•
•
•
•