Yamaha YZF1000RJ Service Manual page 374

4.Voltage
• Connect the pocket tester (DC 20 V) to
the flasher relay coupler.
Tester
(+)
lead
➔
Brown/White terminal
CD
Tester(-)
lead ➔
Frame ground
• Turn the main switch to "ON".
• Turn the turn switch to "L" or "R".
• Check the voltage (12 V) on the "Brown/
White"
CD
lead at the flasher relay termi-
nal.
n
MEETS
V
SPECIFICATION
5.Voltage
• Connect the pocket tester (DC 20 V) to
the bulb socket connector.
~
Flasher light
[ID Turn indicator light
At the flasher light (left):
Tester
(+)
lead
➔
Chocolate lead
CD
Tester (-) lead
➔
Frame ground
At the flasher light (right):
Tester(+) lead
➔
Dark green lead®
Tester(-) lead ➔ Frame ground
• Turn the main switch to "ON".
• Turn the turn switch to "L" or "R".
• Check the voltage (12 V) of the "Choco-
late" lead or "Dark green" lead on the
bulb socket connector.
n
MEETS
V
SPECIFICATION
I
This circuit is not faulty.
8- 44
SIGNAL SYSTEM
I
ELEC
ID I
OUT OF SPECIFICATION
+
The flasher relay is faulty, replace it.
A
11
Ch Dg
OUT OF SPECIFICATION
+
The wiring circuit from the turn switch to
the bulb socket connector is faulty, repair
it.
•
•
•
•
•:
•