Yamaha YZF1000RJ Service Manual page 375

•
•
•
•
•
•
•
EB806024
4.lf the neutral indicator light fails to come
on:
1.Bulb and bulb socket
• Check the bulb and bulb socket for conti-
nuity.
~
CONTINUITY
2.GPS (gear position sensor)
• Disconnect the GPS (gear position sen-
sor)/oil level switch coupler from the
wire harness.
• Check for continuity as follows:
Sky blue
CD-
Ground
~
CONTINUITY
3.Voltage
• Connect the pocket tester (DC 20 V) to
the bulb socket coupler.
Tester(+)
lead ➔
Brown terminal
CD
Tester (-) lead
➔
Frame ground
• Turn the main switch to "ON".
• Check the voltage (12 V).
n
MEETS
V
SPECIFICATION
I
This circuit is not faulty.
8- 45
SIGNAL SYSTEM
I
ELEC
IO
I
NO CONTINUITY
l
I
Replace the bulb and/or bulb socket.
NO CONTINUITY
l
Replace the GPS (gear position sensor).
OUT OF SPECIFICATION
l
The wiring circuit from the main switch to
the bulb socket connector is faulty, repair
it .