Panasonic LX-TD500 Programming Manual page 98

System
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
98
73 Remote FWD Cancel-Once
723
1-4 digits consisting of 0-9,
With this feature number, the Manager or the Operators can reach
an extension that has set Call Forwarding. It is one time ("once")
cancellation, not a permanent cancellation of Call Forwarding on
the destination. [For Manager, Operator only]
• 4.4.8 Remote FWD (Call Forwarding) Cancel — Once (U/M)
74 Trunk Route Control
724
1-4 digits consisting of 0-9,
Specifies the feature number for Trunk Route Control.
[For Manager, Operator only]
• 4.4.13 Trunk Route Control (U/M)
75 UCD Monitor Mode
725
1-4 digits consisting of 0-9,
Specifies the feature number for UCD Monitor mode. One
supervisor can be assigned per UCD Group. The supervisor can
monitor the number of calls in the waiting queue.
• 4.3.81 UCD Monitor Mode (U/M)
76 TIE Line Access
77
1-4 digits consisting of 0-9,
Specifies the feature number for making a TIE line call.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
or #
or #
or #
or #
Programming Guide