Table of Contents
Advertisement
Configuration
1.2.6 Card Properties (ELCOT) – Caller ID
Used to set the parameters for the Caller ID card.
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
22
Caller ID Detection
Check
1.
Check
2.
No check
Activates or deactivates the detection of Caller ID signals
transmitted from the Central Office on a port basis.
• 1.5 Attended Features (F/G)
– Caller ID Service
Detection Start Time
240 ms
80 -1200 ms in 80 ms increments
Specifies the time to begin detection of Caller ID signal after bell
signal disappeared.
• 1.5 Attended Features (F/G)
– Caller ID Service
Programming Guide
Advertisement
Table of Contents
