Panasonic LX-TD500 Programming Manual page 140

System
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
140
33. FWD / DND lamp pattern
FWD: Flash, DND: On
1.
FWD: Flash, DND: On
2.
FWD: On, DND: Flash
Specifies the lamp patterns of the FWD / DND button.
• 1.8 Ringing Features (F/G)
– Do Not Disturb (DND)
• 1.11 Transferring Features (F/G)
– Call Forwarding
34. ELCOT / LCOT Busy-out Loop Relay
OFF
1.
ON
2.
OFF
When a CO line is busied out manually by the Manager / an
Operator, the status of Loop Relay is controlled by this setting.
• 1.3 System Features (F/G)
– Trunk Busy-Out
• 4.4.12 Trunk Busy-Out Setting (U/M)
35. GCOT Busy-out Loop Relay
OFF-RING-OPEN
1.
ON
2.
OFF-RING-GND
3.
OFF-RING-OPEN
When a CO line is busied out manually by the Manager / an
Operator, the status of Loop Relay and Ring-FG are controlled by
this setting.
• 1.3 System Features (F/G)
– Trunk Busy-Out
• 4.4.12 Trunk Busy-Out Setting (U/M)
Programming Guide