Panasonic LX-TD500 Programming Manual page 73

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Type
CO
1.
CO
2.
EXT
3.
Qsig – Master
4.
Qsig – Slave
Specifies the type of each PRI port on a PRI port basis.
Notes
• When you change the programming data, the status of the
card must be made OUS (Out-of-Service), and then INS (In-
Service).
• The type of PRI port can be assigned per PRI23 card.
• This setting is valid when the LPR software version of the
PRI23 card is "Q361AB" or later.
• When you change the type of PRI port, the Group No. is
assigned to 1. First assign the type and then Group No.
• 2.1 ISDN Features (F/G)
– Integrated Services Digital Network (ISDN)
– Integrated Services Digital Network (ISDN) Extension
• 3.1 TIE Line Features (F/G)
– TIE Line Service
• 4.7 ISDN Extension Line (P/G)
DN
Blank
3-4 digits consisting of 0-9 or X
Specifies the DN (Directory Number) for the PRI port.
(Assignable only when "EXT" is specified in "Type" assignment.)
Notes
• "X" can be used as a wild card character which substitutes
any digit in its position. The last one or two digits of DN may
be "X."
• This setting is valid when the LPR software version of the
PRI23 card is "Q361AB" or later.
• 2.3 Numbering Plan (P/G)
Configuration
73