Panasonic LX-TD500 Programming Manual page 128

System
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
128
7. Checking dial *, # by toll restriction
Check
1.
No check [Disable]
2.
Check [Enable]
Specifies whether or not the system checks the user-dialed " " and
"#" during Toll Restriction procedure.
Note
• This assignment is required for certain Central Offices (COs)
to prevent toll fraud.
Some Central Offices ignore the user-dialed " " and "#."
If your CO is such a type, select "No check."
• 1.6 Originating Features (F/G)
– Toll Restriction for Special Carrier Access
8. Confirmation tone for Override, Barge-in,
Conference and Privacy Release
Enable
1.
Enable
2.
Disable
Allows you to remove Confirmation Tone 4.
This tone is sent when a three-party conference is established /
finished.
• 1.13 Audible Tone Features (F/G)
– Confirmation Tones
9. Confirmation tone for Call Pickup, Paging,
Paging- Answer, TAFAS-Answer, Hold Retrieve
and Call Park Retrieve
Enable
1.
Enable
2.
Disable
Allows you to remove Confirmation Tone 3.
This tone is sent when a conversation is established just after an
extension user dials the feature number for accessing the following
features: Call Pickup, Paging, Paging – Answer, TAFAS – Answer,
Hold Retrieve and Call Park Retrieve.
• 1.13 Audible Tone Features (F/G)
– Confirmation Tones
Programming Guide