Panasonic LX-TD500 Programming Manual page 106

System
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
106
Transfer to CO
Disable
1.
Enable
2.
Disable
Enables or disables "Call Transfer to Trunk" feature.
• 4.3.16 Call Transfer (U/M)
Call FWD to CO/TIE
Disable
1.
Enable
2.
Disable
Enables or disables "Call Forwarding to Trunk" feature.
• 4.3.9 Call Forwarding (U/M)
Off-Hook Call Announcement (OHCA)
Enable
1.
Enable
2.
Disable
Specifies whether to utilize OHCA / Whisper OHCA feature or not.
Note
• This setting is valid at the following PT extensions:
[OHCA]
When the called extension is using the KX-T7130, KX-
T7235 or KX-T7436.
[Whisper OHCA]
When both calling and called extensions are using one of the
KX-T7400 series PTs.
• 1.6 Originating Features (F/G)
– Off-Hook Call Announcement (OHCA)
– Off-Hook Call Announcement (OHCA), Whisper
• 4.3.49 Off-Hook Call Announcement (OHCA) (U/M)
• 4.3.50 Off-Hook Call Announcement (OHCA) —Whisper (U/M)
Programming Guide