Panasonic LX-TD500 Programming Manual page 209

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
[CPC Signal] IN Detection
Enable: DID/ELCOT/GCOT/LCOT/T1 [GCO]/T1 [LCO] card
1.
Enable
2.
Disable
Specifies whether CPC Detection on incoming CO calls is enabled
or disabled.
If enabled, the system disconnects the line with the time set in
program "[CPC Signal] IN Detection—Detection Time" when the
CPC signal is detected.
• 1.3 System Features (F/G)
– Calling Party Control (CPC) Signal Detection
[CPC Signal] IN Detection—Detection Time
400 ms
1.
None
2.
6.5 ms
3.
(2-75) 8 ms
Specifies the expected minimum duration for detecting CPC
(Calling Party Control) signal on incoming CO calls.
(Assignable for ELCOT, GCOT, LCOT, T1 [GCO] and T1 [LCO]
cards.)
• 1.3 System Features (F/G)
– Calling Party Control (CPC) Signal Detection
[TIE Line] TIE-to-CO Security Mode
No
1.
No
2.
Yes
Specifies whether to restrict the TIE-to-CO call or not.
If set to "Yes," the TIE caller must enter a valid TIE User Code
before making a CO call via this system.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Line
209