Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
First Dial Timer
1.0 s
0.5-8.0 s in 0.5 s increments
On outgoing CO calls, the system waits at least 1.0 second after
seizing the CO line, before sending the dialing digits to the Central
Office by default.
This allows the Central Office enough time to accept the dialing
digits correctly.
Specifies the appropriate value depending on the requirements of
your local Central Office.
None
% Break
60%
1.
60%
2.
67%
Specifies the % break for pulse digits.
This is the ratio between on-hook and off-hook signals during digit
transmission.
None
Pulse Feedback Tone
Yes
1.
Yes
2.
No
On outgoing CO calls, the dialed number is toned out, which
informs the extension user that dialed number has been dialed out.
The dialed number is toned out by default. Select "No" to turn off
the pulse feedback tone.
None
Configuration
17
Advertisement
Table of Contents
