Operation
a)
Specify the Tenant No. in "5-12 Caller ID Registration" screen.
• This determines the tenant no. of the System Speed Dial Data to be copied.
b)
Click
• The message "W5022 Existing entries will be lost. Do you wish to continue?" is
displayed.
• If you want to cancel the operation, click
c)
Click
• The message "Import..." is displayed and copying the System Speed Dial data begins.
• When copying is finished, "5-12 Caller ID Registration" screen is displayed again.
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
to continue the operation.
Tenant No.
1
1-8
Specifies the tenant to which the Caller ID codes are assigned.
(Required when "Tenant Service" is employed.)
• 1.3 System Features (F/G)
– Tenant Service
• 2.2 Tenant (P/G)
Entry No.
0001-0010
0001-1000 in 10 codes increments
Specifies the entry number of Caller ID codes which you are going
to program.
None
Import from Sys. Speed Dial
—
—
Please refer to "Import from System Speed Dial" in this section.
None
on "5-12 Caller ID Registration" screen.
Cancel
.
Features
277