Panasonic LX-TD500 Programming Manual page 212

Line
Extension Line Copy
Used to copy a part of or all settings of a certain Extension Line to all other Extension Lines at
a time. You can also specify one or several Extension Lines as the copy destination.
Copying the Extension Line Parameters to Other Extension Lines
1. Edit the parameters of the copy source Extension Line and save it.
2. Point to
• "Extension Line Copy" screen is displayed.
• The current Extension Line (copy source) number is shown as "Copy from DN XXXX."
3. Select the Extension Line parameters to copy in "Copy Item" field.
• Only parameters which are available to copy are shown in "Copy Item" field.
This depends on the attribute of the copy source Extension Line.
• Items marked with " " are copied.
4. Point to
• All displayed Extension Line Nos. will be highlighted.
• You can also specify one or several Extension Lines as the copy destination by clicking
it (them) directly.
5. Point to
• "Are you sure?" is displayed.
6. Point to
• "Copying" is displayed while the source data is being copied to the destination.
• Parameters of the destination Extension Lines are immediately effective when copying
is finished.
212
on "4-2 Extension Line" screen of the copy source and click.
in the "Destination Extension Line" field and click.
and click.
and click.
Programming Guide