Panasonic LX-TD500 Programming Manual page 188

Group
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
188
[UCD Setting] FWD No Answer
Disable
1.
Disable
2.
Enable
Specifies the treatment of the call which is not answered by the
extension in the UCD group within a specified period of time (Call
Forwarding - No Answer Time).
1.
Disable:
The call continues to ring the current destination extension.
2.
Enable:
The system transfers the call to an idle extension in the group.
• 1.3 System Features (F/G)
– Incoming Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
[UCD Setting] Auto LOGOUT Mode
Disable
1.
Disable
2.
1-10 times
Specifies the treatment of extensions in a UCD group who do not /
cannot answer the call.
A member extension may be logged-out automatically, if it does
not answer the call for pre-determined times (1-10) consecutively.
If "Disable" is specified, this setting does not function.
• 1.3 System Features (F/G)
– Incoming Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
Programming Guide