Table of Contents
Advertisement
Key Type
SINGLE-CO
GROUP-CO
LOOP-CO
DSS
PHANTOM
PDN
SDN
G-FWD
G-LOGIN/
LOGOUT
ONE-TOUCH Dial
MESSAGE-
OTHER
Programming Guide
Additional
Parameters
(default)
Trunk Line
Specifies the trunk port physical number (10101 to 31416).
No.
Tone (2)
Specifies the ringer frequency (ring tone type: 1-8) for
incoming calls.
Trunk Group
Specifies the Trunk Group number (01 - 48).
No.
Tone (2)
Specifies the ringer frequency (ring tone type: 1-8) for
incoming calls.
Tone (2)
Specifies the ringer frequency (ring tone type: 1-8) for
incoming calls.
EXT.
Specifies the extension number ( 3 or 4 digits).
EXT.
Specifies the phantom extension number ( 3 or 4 digits).
Ringing (Yes) Specifies whether the extension rings or not when a call to a
phantom button comes in on the extension.
Tone (2)
Specifies the ringer frequency (ring tone type: 1 - 8) for
incoming calls.
Ringing Type
Specifies the timing of ringing when a call comes in on the
(Immediate)
extension: Immediate, 1-ring Delay, 3-ring Delay, 6-ring
Delay, No Ring
EXT.
Specifies the PDN owner's extension number (3 or 4 digits).
Tone (2)
Specifies the ringer frequency (ring tone type: 1 - 8) for
incoming calls.
Ringing Type
Specifies the timing of ringing when a call comes in on the
(Immediate)
extension: Immediate, 1-ring Delay, 3-ring Delay, 6-ring
Delay, No Ring
DN
Specifies the Floating Directory Number of the Incoming
Group.
DN
Specifies the Floating Directory Number of the Incoming
Group.
Specifies the telephone number or feature access number (up
to 24 digits consisting of 0 - 9, , #, -, P, S or F).
Note
• P: Pause, S: Secret Dialing, F: Hook Flash
EXT.
Specifies the extension number or phantom extension
number (3 or 4 digits).
Description
Line
225
Advertisement
Table of Contents
