Panasonic LX-TD500 Programming Manual page 100

System
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
100
96 CLIP
711
1-4 digits consisting of 0-9,
Specifies the feature number for selecting a CLIP (Calling Line
Identification Presentation) number for an outside line or an
extension.
• 4.3.19 Calling Line Identification Presentation (CLIP) (U/M)
97 CLIR / CNIR
59
1-4 digits consisting of 0-9,
Specifies the feature number for turning on / off the CLIR (Calling
Line Identification Restriction) and CNIR (Calling Name
Identification Restriction) feature.
• 4.3.20 Calling Line Identification Restriction (CLIR) / Calling
Name Identification Restriction (CNIR) (U/M)
98 Reserved (Reserved for future use.)
Blank
99 Dial Information (CTI)
Blank
1-4 digits consisting of 0-9,
Specifies the feature number for sending digits to the CTI
application (usually running on a PC connected to the PBX).
• 4.3.24 CTI (Computer Telephony Integration) Code Entry
or #
or #
or #
Programming Guide