Panasonic LX-TD500 Programming Manual page 82

System
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
82
System Speed Dialing Entries Max.
Tenant No. 1: 1000, Tenant No. 2: 1000, Tenant Nos. 3-8: 0
0-1000 in 20 codes increments
Specifies the maximum number of Speed Dialing codes available
for each tenant.
Note
• Up to 2000 Speed Dialing codes can be shared among
tenants under the restriction of up to 1000 codes per tenant.
• 5.2 System Speed Dialing (P/G)
Automatic Route Selection
No check
1.
Check [Enable]
2.
No check [Disable]
Specifies whether to utilize ARS (Automatic Route Selection) or
not. If set to "No" (No check), "Trunk Access, Idle" is activated
instead of ARS when an extension user dials "9" for making an
outside call.
• 1.6 Originating Features (F/G)
– Automatic Route Selection (ARS)
• 7.1 ARS (Automatic Route Selection) (P/G)
External Paging Tone
Check
1.
Check [Enable]
2.
No check [Disable]
If checked, a confirmation tone is emitted from external pagers
before voice announcement.
• 1.14 Paging Features (F/G)
– Paging
• 4.3.55 Paging (U/M)
Programming Guide