Panasonic LX-TD500 Programming Manual page 206

Line
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
206
[DID/TIE] Digits to delete
0
0-16 digits
Specifies the number of digits to be deleted from the number
received from the DID/DID (ISDN)/other PBX via TIE lines.
• 1.5 Attended Features (F/G)
– Direct Inward Dialing (DID)
• 2.3 ISDN Attended Features (F/G)
– Direct Inward Dialing (DID)
• 3.1 TIE Line Features (F/G)
– TIE Line Service
[DID/TIE] Number to be added
Blank
Max. 8 digits consisting of 0-9
Specifies the number (1 to 8 digits) to be added to the number
received from the DID/DID (ISDN)/other PBX via TIE lines.
• 1.5 Attended Features (F/G)
– Direct Inward Dialing (DID)
• 2.3 ISDN Attended Features (F/G)
– Direct Inward Dialing (DID)
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Digit to receive DID
4 (DID/T1[DID] card), 16 (BRI/PRI23 card)
0-16 digits
Specifies the number of digits received from a DID or DID (ISDN)
trunk.
(Assignable only when "Incoming Type" is set to "DID" or "DID
(ISDN)."
Note
• In case of the following cards, a maximum number of digits
to be received is limited to 7 digits; DID, T1 [DID]
• 1.5 Attended Features (F/G)
– Direct Inward Dialing (DID)
• 2.3 ISDN Attended Features (F/G)
– Direct Inward Dialing (DID)
Programming Guide