Panasonic LX-TD500 Programming Manual page 267

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Voice Mail Command
Voice Mail Commands are used to control the activity of Voice Mail port.
There are the following four Voice Mail Commands:
Leave Message, Get Message, AA (Automated Attendant) Service and VM (Voice Mail)
Service.
A unique code (dialing digits), up to 16 digits, can be assigned to each command.
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
[Integration Code] FWD to VM Busy Tone
7
Up to 3 digits consisting of 0-9,
Specifies the FWD to VM Busy Tone code.
Sent to the Voice Mail port when the extension dialed is forwarded
to Voice Mail and no other Voice Mail ports are available to accept
the call. (This signals the Voice Mail port, usually an Automated
Attendant, to let the caller leave a message.)
• 1.3 System Features (F/G)
– Integration, VPS
[Integration Code] FWD to Extension Ringback Tone
8
Up to 3 digits consisting of 0-9,
Specifies the FWD to Extension Ringback Tone code.
Sent to the Voice Mail port when the extension dialed is forwarded
to another, non-voice mail extension.
• 1.3 System Features (F/G)
– Integration, VPS
[Voice Mail Command] Leave Message
H
Up to 16 digits consisting of 0-9, , # or H
Specifies the Leave Message command.
This command is transmitted to a VM port when a call is
forwarded, intercepted or rerouted to the VM port.
• 1.3 System Features (F/G)
– Integration, VPS
or #
or #
Features
267