Configuration
1.2.8 Card Properties (BRI)
Used to assign the parameters for the BRI (Basic Rate Interface) card.
When you change the card properties, the card status must be "OUS (Out-of-Service)."
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
30
Network Type
(Display only)
National ISDN1(fixed)
Displays the ISDN type.
None
[DTMF Signal] Duration
80 ms
1.
80 ms
2.
160 ms
Specifies the duration of the DTMF signals sent to ISDN.
None
[DTMF Signal] Inter-digit Pause
112 ms
64-240 ms in 16 ms increments
Specifies DTMF inter-digit pause time.
None
Programming Guide