Table of Contents
Advertisement
Line
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
210
[TIE Line] Sending TIE Caller ID
No
1.
No
2.
Yes
Specifies whether to send or not the TIE Caller ID to the other end.
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Caller ID
Disable
1.
Disable
2.
Enable
Specifies the waiting timer to receive the Caller ID that is sent from
the CO with an incoming call.
When you select 'Disable,' the system does not wait, so the ringing
starts immediately (i.e., the system does not wait for the Caller ID,
which may take a few seconds).
• 1.5 Attended Features (F/G)
– Caller ID Service on T1 Line
Programming Guide
Advertisement
Table of Contents
