Panasonic LX-TD500 Programming Manual page 159

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Pause Time
1.5 s
1.
1.5 s
2.
2.5 s
3.
3.5 s
4.
4.5 s
Specifies the length of pause time (dialing delay).
The programmed pause time is automatically inserted after a line
access code or a host PBX access code, or manually inserted when
the PAUSE button is pressed by the extension user.
• 1.3 System Features (F/G)
– Host PBX Access
• 4.3.35 External Feature Access (U/M)
PBX Access Code
Blank
1-4 digits consisting of 0-9,
Specifies the PBX access codes required to access the Host PBX or
Centrex service.
If the system is installed behind a host PBX or a Centrex system, an
access code is required to make an outside / Centrex call or to
access Centrex features.
Up to four codes can be assigned per Trunk Group.
• 1.3 System Features (F/G)
– Host PBX Access
• 4.3.35 External Feature Access (U/M)
[Numbering Plan ID] Outgoing—Public
Default
1.
Default
2.
Unknown
3.
ISDN / Telephony
4.
National Standard
5.
Private
Specifies the Numbering Plan ID applied to the outgoing CO calls
via ISDN Public Switched Telephone Network.
None
or #
Group
159