Panasonic LX-TD500 Programming Manual page 55

Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Attribute
TEL
1.
TEL
2.
DSS
3.
VPS (DPT)
Specifies the attribute of the terminal which is to be connected to
the extension port.
1.
TEL:
Select this option when you connect a telephone set to the
extension port.
2.
DSS:
Select this option when you connect a DSS Console to the
extension port.
3.
VPS (DPT):
Select this option when a port of Panasonic Voice Processing
System (one that supports DPT Integration) is connected to the
extension port.
Notes
• "DPT integration (except TVS300)" does not function unless
the VPS is connected to a DLC or DHLC card whose LPR
Version (ROM Version) is 1 or later.
• "DPT integration (TVS300 only)" does not function unless it
is connected to a DLC or DHLC card whose LPR Version
(ROM Version) is 2 or later.
• You can confirm the LPR Version (ROM Version) of the
DLC and the DHLC card in "Card Properties" Screen for
each card. Please refer to "LPR Version" parameter in
Section "1.2.3 Card Properties (DHLC/ESLC/DLC)."
• There is a limit of 8 VPS (DPT) ports per card.
• There is a limit of 16 VPS (DPT) ports per shelf.
• 1.5 VPS (DPT) Port Assignment (P/G)
• 4.3 Extension Line (P/G)
• 4.4 DSS Console (P/G)
Configuration
55