Panasonic LX-TD500 Programming Manual page 34

Configuration
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
1.2.10 Card Properties (PRI23)
Used to assign the parameters for the PRI (Prime Rate Interface) 23 card.
When you change the card properties, the card status must be "OUS (Out-of-Service)."
34
SPID
Blank
Up to 20 digits consisting of 0-9, , # or P (Pause)
Specifies an SPID on an ISDN BRI port basis.
None
DN
Blank
Up to 20 digits consisting of 0-9, , # or P (Pause)
Specifies a DN on an ISDN BRI port basis.
• 2.2 ISDN Originating Features (F/G)
– Calling Line Identification Presentation (CLIP)
• 4.3.19 Calling Line Identification Presentation (CLIP) (U/M)
Programming Guide