Table of Contents
Advertisement
Maintenance
10.5 Power Failure Transfer
Power Failure Transfer connects specific telephones (any SLT and a certain type of APT) to
pre-determined CO lines in the event of system power failure.
Parameter
Default
Value Range
Description/Function
Reference
320
Trunk Card (1-24)
None
None, XXX: YYY [XXX: Card No. (101-314), YYY: Card Type]
Specifies the trunk card number and its type, which will be used in
case of Power Failure Transfer.
• 1.4 Fault Recovery/Diagnostics (F/G)
– Power Failure Transfer
• 2.9.1 Auxiliary Connection for Power Failure Transfer (I/M)
• 1.2 Slot Assignment (P/G)
Programming Guide
Advertisement
Table of Contents
