Panasonic LX-TD500 Programming Manual page 325

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
[Serial Interface Port] PROG (Port 1)
Please refer to "System Programming and Diagnosis with Personal Computer" of Section "1.2
System Administration" in the Features Guide.
Note
• Generally speaking, you should connect your Programming PC to Port 1 and your
SMDR printer to Port 2.
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
[Password] User Programming – PT
1234
4-7 digits consisting of 0-9
Specifies the password required for entering the User Programming
mode by PT.
• 1.2 System Administration (F/G)
– User Programming with Proprietary Telephone
• 3 User Programming (U/M)
[Password] Walking COS
1234
4-7 digits consisting of 0-9
Specifies the password required for using the Walking COS feature.
• 1.6 Originating Features (F/G)
– Walking COS
• 4.3.84 Walking COS (U/M)
[Serial Interface Port] PROG – Parity
(Display only)
None
A parity code indicates what type of parity is used to detect an error
in the string of bits composing a character. Make an appropriate
selection depending on the requirements of your printer or personal
computer.
Note
• Port 1 is fixed to "None."
None
Maintenance
325