Panasonic LX-TD500 Programming Manual page 216

Line
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
216
Initial Display Selection
Caller ID
1.
Caller ID
2.
Trunk Name
3.
DID Name
Specifies the initial display of a display PT when an incoming CO
call with Caller ID information comes in on it.
• 2.2.6 Initial Display Selection (U/M)
[COS No.] Primary
1
1-96
Specifies the Primary COS (Class of Service) to the extension.
• 1.3 System Features (F/G)
– Class of Service (COS)
• 4.4.10 Switching COS (U/M)
[COS No.] Secondary
1
1-96
Specifies the Secondary COS (Class of Service) to the extension.
• 1.3 System Features (F/G)
– Class of Service (COS)
• 4.4.10 Switching COS (U/M)
[Preferred Line] Outgoing
Prime Line - ICM/PDN
1.
No Line
2.
Idle Line
3.
Prime Line - ICM / PDN
4.
Prime Line - CO
Specifies the line to which the extension is connected automatically
when the extension user goes off-hook to make a call.
• 2.2.12 Preferred Line Assignment — Outgoing (U/M)
Programming Guide