Table of Contents
Advertisement
Configuration
2. Point to
• "Card Properties" screen is displayed.
3. After editing the parameters, click
• "Card Properties" screen is closed and "Writing" is displayed while the data changes are
being saved.
Copy Function
When multiple numbers of the same type optional cards are installed in the system, Card
Properties data of one card can be copied to those of all other same type optional cards at a
time. This eliminates the needs to edit each Card Properties data one by one. Up to 16 optional
cards can be specified as the copy destination.
The following example shows how to copy the Card Properties data of a DHLC card (assigned
to Slot No.1) to other DHLC cards (assigned to Slot No.2 to 5):
Copying the Card Properties to Other Card Properties
1. Edit the Card Properties of the copy source card (a DHLC card assigned to Slot No.101) and
save it.
• Please refer to "Editing Card Properties Parameters" on Page 7.
2. Point to the Card button of Slot No. 101, and click.
• "Slot No.101" screen is displayed.
8
, and click.
.
Programming Guide
Advertisement
Table of Contents
